Student Dashboard

Please disable anti-virus software before installing any software application.

ProSpangle Training 2026

By /

Course Information

Course Instructor

Matt Bell Matt Bell Author

Introduction to Training

Important Information about Training
Lesson 1 of 1 within section Introduction to Training. You must enroll in this course to access course content.

Unboxing & Setup

Unboxing the Machine
Lesson 1 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Box Inventory – What’s included
Lesson 2 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
The Punches
Lesson 3 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Locating & Cutting the Zip Tie
Lesson 4 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Attaching the Trays & Waste Reel Cover
Lesson 5 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Plugging In the Machine & Connecting the USB Cable
Lesson 6 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Leveling the Machine
Lesson 7 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Putting Tape on Punches
Lesson 8 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Touch Screen Overview
Lesson 9 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Press Unit
Lesson 10 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Removing & Installing a Press Unit
Lesson 11 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Powering On the Machine & Resolving Error Beeps
Lesson 12 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Checking the Internal Components
Lesson 13 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Putting Design into Memory
Lesson 14 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.
Selecting Design To Be Run
Lesson 15 of 15 within section Unboxing & Setup. You must enroll in this course to access course content.

SPANGLE ELITE SOFTWARE

Installing the Spangle Elite Software
Lesson 1 of 3 within section SPANGLE ELITE SOFTWARE. You must enroll in this course to access course content.
Setting the COM Port
Lesson 2 of 3 within section SPANGLE ELITE SOFTWARE. You must enroll in this course to access course content.
Walking Through the Software – Menus & Tools
Lesson 3 of 3 within section SPANGLE ELITE SOFTWARE. You must enroll in this course to access course content.

SETTING UP THE MACHINE FOR THE FIRST RUN (ONE COLOR DESIGN)

Feeding the Spangle Tape Through the Machine
Lesson 1 of 8 within section SETTING UP THE MACHINE FOR THE FIRST RUN (ONE COLOR DESIGN). You must enroll in this course to access course content.
Loading the Transfer Sheet
Lesson 2 of 8 within section SETTING UP THE MACHINE FOR THE FIRST RUN (ONE COLOR DESIGN). You must enroll in this course to access course content.
Trace the Design
Lesson 3 of 8 within section SETTING UP THE MACHINE FOR THE FIRST RUN (ONE COLOR DESIGN). You must enroll in this course to access course content.
Sending Design to the Spangle Elite Machine
Lesson 4 of 8 within section SETTING UP THE MACHINE FOR THE FIRST RUN (ONE COLOR DESIGN). You must enroll in this course to access course content.
Running the Design
Lesson 5 of 8 within section SETTING UP THE MACHINE FOR THE FIRST RUN (ONE COLOR DESIGN). You must enroll in this course to access course content.
Setting Markers for Multiple Runs
Lesson 6 of 8 within section SETTING UP THE MACHINE FOR THE FIRST RUN (ONE COLOR DESIGN). You must enroll in this course to access course content.
Deleting a Design
Lesson 7 of 8 within section SETTING UP THE MACHINE FOR THE FIRST RUN (ONE COLOR DESIGN). You must enroll in this course to access course content.
Offset Setting
Lesson 8 of 8 within section SETTING UP THE MACHINE FOR THE FIRST RUN (ONE COLOR DESIGN). You must enroll in this course to access course content.

SETTING UP THE MACHINE FOR A MULTI-COLOR & MULTI-SIZE SPANGLE RUN

Set the Colors/Assign Press Units (Punches)
Lesson 1 of 1 within section SETTING UP THE MACHINE FOR A MULTI-COLOR & MULTI-SIZE SPANGLE RUN. You must enroll in this course to access course content.

HOW TO HEAT PRESS TO A SHIRT

Heat Press Temperature, Time & Pressure
Lesson 1 of 2 within section HOW TO HEAT PRESS TO A SHIRT. You must enroll in this course to access course content.
Maintenance of the Heat Press
Lesson 2 of 2 within section HOW TO HEAT PRESS TO A SHIRT. You must enroll in this course to access course content.

MACHINE MAINTENANCE

Maintenance
Lesson 1 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Weekly Maintenance
Lesson 2 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Oiling the Punches
Lesson 3 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Removing Spangle from the Waste Reel
Lesson 4 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Running Excess Oil from the Punches
Lesson 5 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Oiling the Moving Head Rail
Lesson 6 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Cleaning the Table Bar Assembly
Lesson 7 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Cleaning the Feed Roller Tension Bar
Lesson 8 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
X-Bearing Maintenance 
Lesson 9 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Greasing the Hammer Pressure Guides
Lesson 10 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Storage of the Machine when Not in Use
Lesson 11 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Greasing Color Change Gear
Lesson 12 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.
Adjusting the Height of the Transfer Sheet Table
Lesson 13 of 13 within section MACHINE MAINTENANCE. You must enroll in this course to access course content.