This course will take you through the process of unboxing your printer all the way through performing your first head cleaning. This course will also demonstrate how to use the RIP software as well as the optional Designer software.
Please don’t skip lessons, or ignore details because following the instructions WILL save you time and money. It’s exciting to know you can create your own custom apparel, but trying to figure things out on your own can lead to lots of wasted consumables.
Check back periodically for new and improved lessons within the course.
As part of the On-Boarding process, your Customer Care Representative (CCR) will enroll you in the training course(s) you need access to. If you have not gotten in contact with your CCR yet, give them a call at 800-891-1094, and the will get you set-up for success.
Environmental Conditions
UV Printer | Environmental Conditions
Lesson 1 of 1 within section Environmental Conditions.
You must enroll in this course to access course content.
Initial Setup
Unboxing & Assembling the Machine Stand
Lesson 1 of 7 within section Initial Setup.
You must enroll in this course to access course content.
Unboxing the Printer & Unpacking the Accessories
Lesson 2 of 7 within section Initial Setup.
You must enroll in this course to access course content.
Lifting & Mounting the Printer onto the Stand
Lesson 3 of 7 within section Initial Setup.
You must enroll in this course to access course content.
Removing Protective Tape, Attaching the Gas Shocks & Removing the Table Fixing Plates
Lesson 4 of 7 within section Initial Setup.
You must enroll in this course to access course content.
Mounting & Installing the Waste Tank
Lesson 5 of 7 within section Initial Setup.
You must enroll in this course to access course content.
Connecting the Power Cord & Ethernet Cable
Lesson 6 of 7 within section Initial Setup.
You must enroll in this course to access course content.
Lesson 7 of 7 within section Initial Setup.
You must enroll in this course to access course content.
Set Up Part II | Power On
Lesson 1 of 8 within section Set Up Part II | Power On.
You must enroll in this course to access course content.
Lesson 2 of 8 within section Set Up Part II | Power On.
You must enroll in this course to access course content.
Installing the Wiper Blade
Lesson 3 of 8 within section Set Up Part II | Power On.
You must enroll in this course to access course content.
Performing the Initial Ink Charge
Lesson 4 of 8 within section Set Up Part II | Power On.
You must enroll in this course to access course content.
Emptying the Waste Ink Tank
Lesson 5 of 8 within section Set Up Part II | Power On.
You must enroll in this course to access course content.
Inserting Ink Cartridges & Performing an Ink Charge
Lesson 6 of 8 within section Set Up Part II | Power On.
You must enroll in this course to access course content.
Performing a Nozzle Check
Lesson 7 of 8 within section Set Up Part II | Power On.
You must enroll in this course to access course content.
Performing a Head Cleaning
Lesson 8 of 8 within section Set Up Part II | Power On.
You must enroll in this course to access course content.
Maintenance
Lesson 1 of 1 within section Maintenance.
You must enroll in this course to access course content.
Installing Flexi19
Download Profiles, Presets and Swatches
Lesson 1 of 2 within section Installing Flexi19.
You must enroll in this course to access course content.
Download Flexi Presets Guide
Lesson 2 of 2 within section Installing Flexi19.
You must enroll in this course to access course content.
Connecting your Printer to Computer
This section does not have any lessons.
Configuring Printer for Use
Set Up Your Printer First
Lesson 1 of 2 within section Configuring Printer for Use.
You must enroll in this course to access course content.
Video: Setting PG Offsets and Alignment
Lesson 2 of 2 within section Configuring Printer for Use.
You must enroll in this course to access course content.
Printing Braille Flexi19
Printing Braille with Flexi19
Lesson 1 of 1 within section Printing Braille Flexi19.
You must enroll in this course to access course content.
Rotary Attachment Installation
Rotary Attachment Installation
Lesson 1 of 1 within section Rotary Attachment Installation.
You must enroll in this course to access course content.
Need to Know Basics
Primers and Adhesion for UV
Lesson 1 of 1 within section Need to Know Basics.
You must enroll in this course to access course content.
