Student Dashboard

Please disable anti-virus software before installing any software application.

Mutoh ValueJet 426UF

By /

This course is an “introductory set-up” course for your Mutoh ValueJet 426UF printer. This course will take you through the process of unboxing your printer all the way through adding the color inks to your printer.

“Proper training is the best preparation for success.”

Please don’t skip lessons, or ignore details because following the instructions WILL save you time and money. It’s exciting to know you can create your own custom apparel, but trying to figure things out on your own can lead to lots of wasted consumables.

Check back periodically for new and improved lessons within the course.

As part of the On-Boarding process,  your Customer Care Representative (CCR) will enroll you in the training course(s) you need access to. If you have not gotten in contact with your CCR yet, give them a call at 800-891-1094, and the will get you set-up for success.

Course Information

Course Description and Prerequisites

Read First
Lesson 1 of 1 within section Course Description and Prerequisites. You must enroll in this course to access course content.

INITIAL SET UP

Unboxing the Printer
Lesson 1 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.
Ink Configuration
Lesson 2 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.
Plugging In, Powering On and Registering the Printer Online
Lesson 3 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.
Printer Set Up
Lesson 4 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.
Inserting the Color Ink Cartridges
Lesson 5 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.

MAINTENANCE

Daily Maintenance
Lesson 1 of 1 within section MAINTENANCE. You must enroll in this course to access course content.

RIP SOFTWARE

Installing 
Lesson 1 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
RIP Overview
Lesson 2 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Understanding Queues
Lesson 3 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Queue Functions
Lesson 4 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Bringing in a File
Lesson 5 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Templates for RIP
Lesson 6 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Building Custom Print Modes
Lesson 7 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Setting Ink Cost
Lesson 8 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Topographical Textures
Lesson 9 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Understanding Queue Manager
Lesson 10 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Archiving and Retrieving a File
Lesson 11 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Smart Bar Features and Application
Lesson 12 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Queue Properties Settings
Lesson 13 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Ripping, Previewing, Printing and Reprinting a File
Lesson 14 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.

DESIGNER SOFTWARE (Optional Add-On)

Designer Interface Overview
Lesson 1 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Designer – Printing Outline and Graphic
Lesson 2 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Blank Size Setting and Adjusting
Lesson 3 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Variable Data and Serialization
Lesson 4 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Custom Primers, Underbases and Clearcoats
Lesson 5 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Clipping a Bitmap in Designer
Lesson 6 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Shapes Tool
Lesson 7 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Zoom or Magnify Tools
Lesson 8 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Generating a Targeted Outline on the UV Bed
Lesson 9 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.

Need to Know Basics

Primers and Adhesion for UV
Lesson 1 of 1 within section Need to Know Basics. You must enroll in this course to access course content.

Schedule Your Live 1 on 1 Training

Schedule Here
Lesson 1 of 1 within section Schedule Your Live 1 on 1 Training. You must enroll in this course to access course content.

Course Description and Prerequisites

Read First
Lesson 1 of 1 within section Course Description and Prerequisites. You must enroll in this course to access course content.

INITIAL SET UP

Unboxing the Printer
Lesson 1 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.
Ink Configuration
Lesson 2 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.
Plugging In, Powering On and Registering the Printer Online
Lesson 3 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.
Printer Set Up
Lesson 4 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.
Inserting the Color Ink Cartridges
Lesson 5 of 5 within section INITIAL SET UP. You must enroll in this course to access course content.

MAINTENANCE

Daily Maintenance
Lesson 1 of 1 within section MAINTENANCE. You must enroll in this course to access course content.

RIP SOFTWARE

Installing 
Lesson 1 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
RIP Overview
Lesson 2 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Understanding Queues
Lesson 3 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Queue Functions
Lesson 4 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Bringing in a File
Lesson 5 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Templates for RIP
Lesson 6 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Building Custom Print Modes
Lesson 7 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Setting Ink Cost
Lesson 8 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Topographical Textures
Lesson 9 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Understanding Queue Manager
Lesson 10 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Archiving and Retrieving a File
Lesson 11 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Smart Bar Features and Application
Lesson 12 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Queue Properties Settings
Lesson 13 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.
Ripping, Previewing, Printing and Reprinting a File
Lesson 14 of 14 within section RIP SOFTWARE. You must enroll in this course to access course content.

DESIGNER SOFTWARE (Optional Add-On)

Designer Interface Overview
Lesson 1 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Designer – Printing Outline and Graphic
Lesson 2 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Blank Size Setting and Adjusting
Lesson 3 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Variable Data and Serialization
Lesson 4 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Custom Primers, Underbases and Clearcoats
Lesson 5 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Clipping a Bitmap in Designer
Lesson 6 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Shapes Tool
Lesson 7 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Zoom or Magnify Tools
Lesson 8 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.
Generating a Targeted Outline on the UV Bed
Lesson 9 of 9 within section DESIGNER SOFTWARE (Optional Add-On). You must enroll in this course to access course content.

Need to Know Basics

Primers and Adhesion for UV
Lesson 1 of 1 within section Need to Know Basics. You must enroll in this course to access course content.

Schedule Your Live 1 on 1 Training

Schedule Here
Lesson 1 of 1 within section Schedule Your Live 1 on 1 Training. You must enroll in this course to access course content.
Student Dashboard

Contact Us

Copyright © 2021 ColDesi Training | Powered by ColDesi Training